Volvo Engine Service & Repair
Expert diagnostics, maintenance, and repair for all Volvo diesel engines at our Sidney and Brookville, Ohio locations
About Volvo Trucks North America
Volvo manufactures innovative diesel engines known for performance, fuel efficiency, and environmental care. Their engines power Volvo trucks and are available in Mack applications, featuring advanced technology and integrated solutions.
Headquarters:
Greensboro, North Carolina, USA
Founded:
1927
Specialties:
Volvo Engine Models We Service
D13
Applications:
- Long-haul
- Regional
- Vocational
D11
Applications:
- Regional
- Bulk haul
- Construction
D16
Applications:
- Heavy haul
- Severe duty
D13TC
Applications:
- Long-haul
- Fuel efficiency focused
Common Volvo Fault Codes
MID 128 PID 411 FMI 3
EGR Temperature High
Symptoms:
- Power reduction
- High exhaust temp
- Poor fuel economy
Possible Causes:
- EGR cooler restriction
- Coolant flow issue
- Sensor fault
MID 128 SID 27 FMI 3
VGT Actuator Position Error
Symptoms:
- Turbo lag
- Black smoke
- Power loss
Possible Causes:
- Sticking VGT
- Actuator failure
- Carbon buildup
MID 128 PPID 326 FMI 10
SCR Conversion Efficiency Low
Symptoms:
- NOx emissions high
- DEF usage increased
- Derate warning
Possible Causes:
- Poor DEF quality
- SCR catalyst issue
- Dosing problems
MID 128 PPID 329 FMI 3
DPF Soot Load High
Symptoms:
- Regeneration requests
- Fuel consumption up
- Warning lights
Possible Causes:
- Short trip cycles
- Sensor issues
- DPF damage
Experiencing a fault code? Our certified technicians can diagnose and repair any Volvo engine issue.
Get Diagnostic HelpVolvo Maintenance Schedule
Oil & Filter Change
Every 35,000-55,000 miles
Use Volvo VDS-4.5 approved engine oil
Fuel Filter Replacement
Every 35,000-55,000 miles
Replace primary and secondary fuel filters
Valve Adjustment
Every 150,000 miles
Adjust valves, unit injectors, and engine brake
DPF Cleaning
Every 250,000-500,000 miles
Remove ash accumulation through professional cleaning
Coolant Change
Every 300,000 miles or 6 years
Replace with Volvo approved extended life coolant
Transmission Service
Every 250,000-500,000 miles
I-Shift transmission fluid and filter change
Volvo Emission Systems
DPF System
Volvo DPF with automatic and parked regeneration
Maintenance Tips:
- Follow regeneration prompts
- Avoid shutdown during active regen
- Use low-ash engine oil
- Monitor differential pressure
Common Issues:
- Frequent regen cycles
- Incomplete regenerations
- 7th injector problems
- Temperature sensor failures
SCR System
Volvo SCR with optimized DEF consumption
Maintenance Tips:
- Use only API certified DEF
- Check dosing valve regularly
- Monitor NOx sensors
- Keep DEF tank clean
Common Issues:
- DEF pump failures
- Crystallization at injector
- NOx sensor faults
- SCR efficiency loss
DEF System
Integrated DEF system with heating and quality sensing
Maintenance Tips:
- Maintain 1/4 tank minimum
- Replace DEF filter on schedule
- Check tank heater operation
- Use proper filling procedures
Common Issues:
- Header unit problems
- Tank sensor failures
- Heater circuit faults
- Contamination issues
EGR System
Cooled EGR with integrated bypass for optimal control
Maintenance Tips:
- Service EGR cooler regularly
- Check for coolant leaks
- Clean EGR passages
- Verify valve operation
Common Issues:
- Cooler fouling
- Valve sticking
- Coolant contamination
- Differential pressure sensor faults
Expert Volvo Engine Service at Two Convenient Locations
With over 15 years of experience, Wayne Truck & Trailer is your trusted partner for all Volvo engine repairs and maintenance.
Serving Sidney, Brookville, Dayton, Piqua, Troy, Bellefontaine, and surrounding areas